The VDL 6000 AIS Class A System
is compliant to the International
standards ITU M.1371-1 and IEC
61993-2 as applicable for SOLAS
vessels.
The VDL 6000 is robustly designed with technology used in C.N.S Systems civil aviation products with its special demands on quality, performance, safety, security and traceability.
The VDL 6000 system consists of three basic building blocks; Transponder, MKD and Connection
Unit (including connecting cables). The system is optionally delivered with antennas, antenna cables
and connectors.
The VDL 6000 system is based on a digital radio module, high performance processors, robust software
and a compact design.
Specifications:
General
Power requirements
24 V DC, from Connection unit
Transmitter
Number of Transmitters
1
Tuning Range
156.025 –162.025 MHz
Channel spacing
12.5 and 25 kHz
TX to Rx turnaround time
< 1 ms
Channel selection time
< 26 ms
Baud rate
9600 bps
Modulation scheme
GMSK (AIS TDMA ) / GFSK (DSC)
Carrier power (adjustable)
33 and 41 dBm (2 and 12.5W) 50Ohm
Receiver
Number of receivers
3 (2 AIS TDMA, 1 DSC)
Tuning range
156.025 - 162.025 MHz
Channel spacing
12.5 and 25 kHz
Sensitivity, 20% MER
< -107 dBm AIS for 25 kHz, < -98 dBm
GNSS Receiver
GNSS receiver
12 parallel channels
DGNSS support
yes
Environmental
IEC 60945
Protected installation
Electrical Interfaces
Sensor Interfaces 1 to 3 (RS485)
IEC 61162-1 or -2
Pilot/Auxiliary (RS485)
IEC 61162-2
External Display (RS485)
IEC 61162-2
Long-range (RS485)
IEC 61162-2
DGNSS correction input (RS232)
RTCM-SC-104
Alarm relay
Normally closed
Transponder Interfaces
VHF Antenna
Type N, jack
GNSS Antenna
Type TNC, jack
Applicable Standards
ITU-R M.1371-1, IEC 61993-2, IEC 60945,
IEC 61162-1/2
RTCA/DO 178B (SW development)
Level C
IPC-A-610 (Manufacturing)
Physical characteristics transponder
Size (W x H x L)
175 x 81 x 276 mm
Weight
3.9 kg
Cooling
Not required
Minimum Keyboard and Display
Power requirements
24 V DC, from Connection Unit
Size (W x H x L) 1
20 x 180 x 45 mm
Weight
1.2 kg
Connection unit
Power requirements
24 V DC 3 A
Size
175 x 345 x 75 mm
Weight
1.1 kg
Accessories included
Interface cables between transponder, MKD and connection unit
